|ALGEX™ REMOVES ALGAE, ZEBRA MUSSELS, BARNACLES.|
FOAMING ACTION ENSURES EVEN COVERAGE.
ALGAE: Remove loose growth with scrub brush or power washer. Spray Foam onto Algae, making sure that the surface is drenched. Do not spray onto bare aluminum. Allow to work until algae releases easily from the aluminum. Power wash or brush & rinse clean. Repeat if necessary. Do not allow ALGEX™ to dry before rinsing.
BARNACLES & MUSSELS: Remove Algae as above. Spray Foam onto Barnacles & Mussels and allow to work 30 to 60 minutes. ALGEX™ will soften shells to make scraping easier. Scrape off with wooden or plastic scraper. Spray Foam onto adhesive & rings. Allow to work 30 to 60 minutes. Scrape away residue. Rinse clean. Repeat if necessary. Do not spray ALGEX™ onto bare aluminum.
CALCIUM: Not suitable for calcium deposit removal.
If aluminum is stained or oxidized, clean & brighten with ALUMABRITE CBX®. Remove streaks and white cloud with ALUMABUFF™ to maintain shiny finish. If pontoons are etched or streaked buff with ALUMABUFF™. Protect with ALUMETRON™. To reduce fouling attachment and make future clean up easier, apply VS721™ over ALUMETRON™.
DO NOT FREEZE
CAUTION: CAUSES BURNS. Do not swallow. Do not get in eyes & on skin or clothing. Do not breathe fumes. Handle with care. Keep out of reach of children. Wear protective gloves/clothing and eye/face protection when mixing or using. Use only in a well-ventilated area.
FIRST AID: Contain Sulphamidic acid (1%-5%), If medical advice is needed, have product container or label at hand. If swallowed, call a Poison Control Centre or doctor immediately. Do not induce vomiting. If in eyes or on skin, rinse cautiously with water for several minutes. Seek medical advice if discomfort or irritation persists. If breathed in, move person into fresh air.