FOR ALUMINUM PONTOONS, BOATS, MASTS, & BOOMS
REMOVES OXIDE, SOOT, SOIL, WATER STAIN
WILL NOT CORRODE ALUMINUM
ALUMABRITE™ may be applied hot or cold with high pressure sprayer, garden / pump sprayer or brush.
1. Mix 1 part ALUMABRITE™ to 15 parts water. Increase strength by up to 1 to 5 for heavy soil conditions. Effectiveness is enhanced if hot water is used. Test first on wet aluminum in an inconspicuous spot to determine proper concentration and dwell time; when aluminum turns silver and before it turns white.
2. Wet aluminum with water.
3. Spray on from bottom to top and down again so that the surface is completely drenched. Do not allow cleaner to dry before rinsing.
4. At predetermined time, determined by test, when aluminum turns silver, but before it turns white, streaks or the cleaner gels or dries, rinse thoroughly with water, or spray clean with pressure washer.
SHAKE WELL BEFORE USING
DO NOT FREEZE
KEEP OUT OF REACH OF CHILDREN
ALUMABRITE™ will not penetrate oil or grease. If pollutants are present on aluminum, streaking or irregular patches may occur. Wash the aluminum with a 1:4 solution of BOAT CLEAN PLUS™ and water to remove oily pollutants prior to applying ALUMABRITE™. Use ample water when rinsing. ALUMABRITE™ will etch glass and paint. Cover with a coat of grease for protection. Wear goggles, rubber gloves and protective clothing.
FIRST AID TREATMENT:
Contains Hydrofluoric and Sulfuric acid. If splashed in eyes or on skin, flush thoroughly with water. If swallowed, give three to four glasses of milk or water. DO NOT induce vomiting. Call physician immediately.