• STOPS Rust, Corrosion, Pitting on Stainless Steel.
• Direct to Metal. No Primer Required.
• Hard, Durable Clear Coat. Not Oily. Resists Dust, Dirt, Fingerprints.
Not recommended for submerged Stainless Steel. Protect adjacent areas to avoid clean up.
Stainless steel must be clean, dry, free from rust, corrosion, oil and grease. Use QUICK SILVER® Stainless Rust Remover to remove rust and corrosion. Use BOAT CLEAN PLUS® to remove oil, grease and dirt.
Wipe on 2 thin coats STAINLESS SHIELD® with a lint free cloth pad in long even overlapping coats. Allow 1st coat to dry before applying 2nd coat. Do not overwork or bubbles and streaks will result.
|CURE TIME at 727°F (22°C) – 50% RH||APPLICATION TEMPERATURE|
|To touch 10 min.||15°C – 35°C|
|To recoat 20 min.||60°F – 95°F|
|To light service 8 hrs.||HUMIDITY|
|To full cure 48 hrs.||<80% RH|
Soap & water.
Repair scratched or abraded surfaces by cleaning damaged area as above and apply 2 thin coats of STAINLESS SHIELD® with a folded lint free cloth pad.
Wear safety glasses and protect skin form excessive exposure. If splashed in eyes, rinse with water for 10 minutes. If on skin wash with soap and water.